| |
|
|
|
|
|
|
|
 |
| Mineral Stone Nano Coating |
 |
Superior water repelling properties |
|
Make Stone it self-clean |
|
Abrasion and UV resistance |
|
Easy coating and re-coating process |
|
Long-lasting protection – up to 10 years |
 |
|
|
| |
|
|
|
|
| |
|
 |
 |
 |
| |
|
|
|
 |
 |
 |
The strong SiO2-barrier coating is mainly used in the surface protection of mineral stones. When applied, most of its Nano SiO2 particles form a transparent nanofilm (with a thickness of around 100 nanometers) on the stone surface, but a portion of the particles would penetrate, providing in-depth surface protection. The film, with lotus effects, is self-cleaning and can greatly reduce cleaning cost and time.
It is also highly resistant against abrasion, chemicals, heat and UV radiation.
|
 |
| |
Superior water repelling properties – Prevents streak marks and discoloration
Non-stick and easy-clean – Reduces cleaning time and cost
Reduces water residue, dirt build-up and corrosion
Protects surfaces from air pollutants – Prevents surface discoloration
Reduces mould, moss, fungi, and algae growth by reducing moisture on surfaces
High transparency and zero visual effects
Coating thickness of around 100nm – No formation of sticky silicon films
Heat resistance (up to 4000 C)
Chemical resistance (up to pH-value of 13)
Abrasion and UV resistance
Easy coating and re-coating process (hardens at room temperature. No additional energy or UV light required)
Long-lasting protection – up to 10 years in most conditions
Green and eco-friendly
|
 |
| |
All types of porous mineral-based surface, eg. gas concrete, sandstone, clay, terracotta, roof tiles, building facades, stone paneling, porous granite and porous marble…etc.
|
 |
| |
Manually: By spraying and wetting the surface
Industrially: By standard HVLP system
Coverage Rate of per liter : Manually: 50 – 80 m2 (sqm), Industrially: 40 - 60 m2 (sqm)
|
| |
 |
| |
|
